Sharp MX-M564N/M464N/M364N
Sharp MX-M564N/M464N/M364N
Expandable Solution with Outstanding Eco Performance— Your Ideal Partner in Growth
Any business in need of an energy-efficient partner that can keep pace with changing document demands should look no further than the configure-friendly MX-M564N/M464N/M364N.
Along with multifunction efficiency—including full-colour network scanning—this B/W A3 solution offers advanced environmental performance and easy expandability. Flexible system configurations allow the MX-M564N/M464N/M364N to accommodate nearly any type of business. There’s a space-efficient inner finisher for workplaces with limited room, a 4,000-sheet finisher for offices handling high-volume jobs, and saddle stitch finishers for businesses requiring complex document finishing, like that needed for pamphlet making.
The MX-M564N/M464N/M364N also supports the Sharpdesk Mobile print/scan application for conducting business on the go and ensures the reliable safeguarding of business communications through built-in and add-on security functions.
Eco Friendliness
The MX-M564N/M464N/M364N gets its eco edge from advanced environmental technologies incorporated throughout the MFP—from its hardware and electrical system down to its software and supplies. Even its short warm-up time of 12 seconds produces substantial energy savings.
The new Mycrostoner-CAP is one of those eco-boosting supplies. The low melting point of this proprietary toner lets it get the job done with less energy than conventional toner requires.
And this dramatically reduced power consumption is what gives the MX-M564N/M464N/M364N one of the lowest TEC values*1in the industry—significantly lower than even the maximum values allowable under ENERGY STAR®.
- *1: Typical amount of energy consumed in a hypothetical week measured as stipulated under the ENERGY STAR® programme.
- *2: Maximum TEC value allowable under the latest ENERGY STAR programme (version 2.0).
- *3: Measured at 230V.
- *4: Compared to MX-M502N/M452N/M362N (warm-up time 20 seconds).
Productive Performance
Already designed to maximize productivity, the MX-M564N/M464N/M364N becomes even more of a workhorse when the optional 500 + 2,000-sheet paper drawer is added on, boosting total paper capacity to 6,600 sheets. A variety of finishing options, including a 4,000-sheet finisher and two types of saddle stitch finishers, makes for attractive and efficient document finishing. And a 100-sheet RSPF (reversing single pass feeder) ensures the fast and smooth handling of one- or two-sided originals.
Ease of Use
The MX-M564N/M464N/M364N is equipped with a 7.0-inch WVGA touchscreen colour LCD that provides easy navigation of MFP functions and settings. The LCD also shows thumbnail displays and data file previews, raising the bar on user friendliness. A retractable QWERTY keyboard option offers added convenience.
* Copy previews are in B/W.
Other Key Features
Highly Productive Operation
- Fast first copy time 3.7/3.9/4.5 seconds and short warm-up time of 12 seconds enable efficient handling of short-run jobs
- Handles paper up to 300 g/m2 thick*1
- Long Paper Feeding Tray (option) accommodates extra-long paper up to 1,200 mm*2
Advanced Functionality
- Standard PCL 6 emulation; optional PostScript® 3™ emulation and XPS
- Supports direct printing and USB Pull Print functions
- Full-colour network scanning with scan to e-mail/FTP server/desktop/network folder/USB memory
- Document Filing function to instantly reuse job data stored on the HDD
- HDD also works as NAS (network attached storage)*3
- Sharp OSA (Open Systems Architecture)*4 allows integration with cloud-based applications and makes them accessible from the LCD control panel
- Sharpdesk Mobile print/scan application connects the MFP to smartphones and media tablets via a wireless LAN connection*5
Multi-Layered Security Solutions
- Standard-equipped security functions include encryption/erasing of internally stored job data and protection of administrator/file/folder passwords*2
- Function-specific user authentication
- Document Control function*6 prevents unauthorised copying, scanning, faxing, and filing of confidential documents
- Stored data can be initialised when it is time to replace the MFP
Enhanced Usability
- Easy-grip handles allow for easy opening/closing of paper drawers
Environmentally Advanced Design
- Eco Scan function saves energy by keeping the fusing roller turned off during jobs that don’t require any printing
- Optimises Auto Power Shut-Off mode settings based on prior usage patterns
- Power ON/OFF Schedule function automatically turns the MFP on or off according to administrator-set time schedules
- *1: Paper must be fed through multi-bypass tray. Depending on usage conditions and type of paper, printing may not be executed correctly.
- *2: Contact a Sharp customer representative for details.
- *3: Sharp recommends using the optional Mirroring Kit to back up data saved to the MFP’s HDD.
- *4: Requires optional MX-AMX2 and/or MX-AMX3.
- *5: Availability varies by country/region.
- *6: Requires optional Data Security Kit.
System Configuration
- MX-FN10
- MX-FN11
- MX-FN18
- MX-FN17
- MX-DE12
- MX-DE13
- MX-DE14
- MX-DE20
- MX-LT10
- MX-FX11
- MX-LC11
- MX-PNX6A/B/C/D
- MX-PN11A/B/C/D
- MX-PNX5A/B/C/D
Certain options may not be available in some areas.
Specifications for Options
MX-FN17Finisher
| Paper size | Non offset | A3W (12" x 18") to A5 (5 1/2" x 8 1/2")*1 |
|---|---|---|
| Offset/staple | A3 (11" x 17") to B5*2 (8 1/2" x 11") | |
| Max. paper capacity | 500 sheets (A4 or smaller), 250 sheets (B4 or larger) | |
| Max. stapling capacity | 50 sheets (A4 or smaller), 30 sheets (B4 or larger) | |
| Staple position | 3 locations (front, rear or both) | |
MX-FN10Saddle Stitch Finisher
| Paper size | Non offset | A3W (12" x 18") to A5 (5 1/2" x 8 1/2")*1 |
|---|---|---|
| Offset/staple | A3 (11" x 17") to B5 (8 1/2" x 11") | |
| Saddle stitch | A3 (11" x 17"), B4 (8 1/2" x 14"), A4 (8 1/2" x 11")*3 | |
| Max. paper capacity | Offset tray | 1,000 sheets (A4 or smaller), 500 sheets (B4 or larger) |
| Saddle stitch tray | 10 sets of 11–15 sheets, 15 sets of 6–10 sheets, 20 sets of 1–5 sheets | |
| Max. stapling capacity | 50 sheets (A4 or smaller), 25 sheets (B4 or larger) | |
| Staple position | 3 locations (front, rear or both) | |
MX-FN11Finisher
| Paper size | Non offset | A3W (12" x 18") to A5 (5 1/2" x 8 1/2")*1 |
|---|---|---|
| Offset/staple | A3 (11" x 17") to B5*2 (8 1/2" x 11") | |
| Max. paper capacity | Upper tray | 1,550 sheets (A4, 8 1/2" x 11") |
| Lower tray | 2,450 sheets (A4, 8 1/2" x 11") | |
| Max. stapling capacity | 50 sheets (A4 or smaller), 30 sheets (A4*4, B4 or larger) | |
| Staple position | 3 locations (front, rear or both) | |
MX-FN18Saddle Stitch Finisher
| Paper size | Non offset | A3W (12" x 18") to A5 (5 1/2" x 8 1/2")*1 |
|---|---|---|
| Offset/staple | A3 (11" x 17") to B5*2 (8 1/2" x 11") | |
| Saddle stitch | A3 (11" x 17"), B4 (8 1/2" x 14"), A4 (8 1/2" x 11")*3 | |
| Max. paper capacity | Upper tray | 1,550 sheets (A4, 8 1/2" x 11") |
| Lower tray | 2,450 sheets (A4, 8 1/2" x 11") | |
| Saddle stitch tray | 10 sets of 11–15 sheets, 15 sets of 6–10 sheets, 25 sets of 1–5 sheets | |
| Max. stapling capacity | 50 sheets (A4 or smaller), 30 sheets (A4*4, B4 or larger) | |
| Staple position | 3 locations (front, rear or both) | |
Punch Modules
| Model name | For the MX-FN17 | MX-PN11A | MX-PN11B | MX-PN11C | MX-PN11D |
|---|---|---|---|---|---|
| For the MX-FN10 | MX-PNX5A | MX-PNX5B | MX-PNX5C | MX-PNX5D | |
| For the MX-FN11/FN18 | MX-PNX6A | MX-PNX6B | MX-PNX6C | MX-PNX6D | |
| Number of holes | 2 | 3 | 4 | 4 (wide) | |
| Paper weight | 55 to 256 g/m2 * | ||||
- * Guaranteed punchable weight is 55 to 128 g/m2.
MX-DE12Stand with 500-Sheet Paper Drawer
| Paper size | A3 (11" x 17") to A5 (5 1/2" x 8 1/2")*1 |
|---|---|
| Paper capacity | 500 sheets |
MX-DE13Stand with 2 x 500-Sheet Paper Drawer
| Paper size | Upper and lower tray | A3 (11" x 17") to A5 (5 1/2" x 8 1/2")*1 |
|---|---|---|
| Paper capacity | Upper and lower tray | 500 sheets each |
MX-DE14Stand with 3 x 500-Sheet Paper Drawer
| Paper size | Upper/middle/lower tray | A3 (11" x 17") to A5 (5 1/2" x 8 1/2")*1 |
|---|---|---|
| Paper capacity | Upper/middle/lower tray | 500 sheets each |
MX-DE20Stand with 500 + 2,000-Sheet Paper Drawer
| Paper size | Upper tray | A3 (11" x 17") to A5 (5 1/2" x 8 1/2")*1 |
|---|---|---|
| Lower right/left tray | A4 (8 1/2" x 11") | |
| Paper capacity | Upper tray | 500 sheets |
| Lower right tray | 850 sheets | |
| Lower left tray | 1,150 sheets |
MX-LT10Long Paper Feeding Tray
| Paper size | Max. 1,200 mm long |
|---|---|
| Paper capacity | 1 sheet |
MX-LC11Large Capacity Tray
| Paper size | A4 (8 1/2" x 11") |
|---|---|
| Paper capacity | 3,500 sheets |
MX-FX11Fax Expansion Kit
| Compression method | MH/MR/MMR/JBIG |
|---|---|
| Communication protocol | Super G3/G3 |
| Modem speed | 33,600 bps to 2,400 bps |
- *1: Only short-edge feeding can be used with A5 (5 1/2" x 8 1/2") paper.
- *2: Only long-edge feeding can be used with B5 paper.
- *3: Only short-edge feeding can be used with A4 (8 1/2" x 11") paper.
- *4: Short-edge feeding.
- Note 1: All specifications relating to paper capacity refer to 80 g/m2 paper.
- Note 2: When using Sharpdesk and Sharp OSA, please ask your Sharp representative about PC system requirements.
General
| Type | Desktop | |
|---|---|---|
| Engine speed | A4 (8 1/2" x 11")*1: Max. 56/46/36 ppm*2 A3 (11" x 17"): Max. 26/22/17 ppm |
|
| Control panel display | 7.0-inch colour LCD touchscreen | |
| Paper size | Max. A3 wide (12" x 18")*3, min. A5 (5 1/2" x 8 1/2")*4 | |
| Paper capacity (80 g/m2) |
Standard | 600 sheets (500-sheet tray and 100-sheet multi-bypass tray) |
| Maximum | 6,600 sheets (600 sheets & optional 500 + 2,000-sheet tray and 3,500-sheet tray) |
|
| Paper weight*5 | Tray | 60 g/m2 to 220 g/m2 (16 lbs bond to 80 lbs cover) |
| Multi-bypass tray | 55 g/m2 to 300 g/m2 (13 lbs bond to 110 lbs cover) | |
| Warm-up time*6 | 12 sec. | |
| Memory | Standard | 3GB (copy/print shared) 320GB HDD*7 |
| Option | 2GB | |
| Power requirements | Rated local AC voltage ±10%, 50/60 Hz | |
| Power consumption | Max. 1.84 kW (220 to 240V), max. 1.44 kW (100 to 127V) | |
| Dimensions (W x D x H) | 608 x 690 x 837 mm (23 15/16" x 27 11/64" x 32 61/64") | |
| Weight (approx.) | MX-M564N/M464N: 66 kg (145.5 lbs) MX-M364N: 65 kg (143.3 lbs) |
|
Copier
| Original paper size | Max. A3 (11" x 17") | |
|---|---|---|
| First copy time*8 | 3.7/3.9/4.5 sec. | |
| Continuous copy | Max. 999 copies | |
| Resolution | Scan | 600 x 600 dpi, 600 x 400 dpi, 600 x 300 dpi*9 |
| 600 x 600 dpi, 9,600 (equivalent) x 600 dpi | ||
| Gradation | Scan | 256 levels |
| 256 levels (equivalent) | ||
| Zoom range | 25% to 400% (25% to 200% using RSPF) in 1% increments | |
| Preset copy ratios | Metric: 10 ratios (5R/5E), inch: 8 ratios (4R/4E) | |
Network Colour Scanner
| Scan method | Push scan (via control panel), pull scan (TWAIN-compliant application) | |
|---|---|---|
| Scan speed*10 | Colour & B/W | Max. 56 originals/min. |
| Resolution | Push scan | 100, 200, 300, 400, 600 dpi |
| Pull scan | 75, 100, 150, 200, 300, 400, 600 dpi 50 to 9,600 dpi via user setting |
|
| File formats | TIFF, PDF, PDF/A, encrypted PDF, JPEG*11, XPS | |
| Scanner utility | Sharpdesk | |
| Scan destinations | Scan to e-mail/desktop/FTP server/network folder (SMB)/USB memory | |
Document Filing
| Document filing capacity*12 | Main and custom folders: 20,000 pages or 3,000 files |
|---|---|
| Quick file folder: 10,000 pages or 1,000 files | |
| Stored jobs*13 | Copy, print, scan, fax transmission |
| Storage folders | Quick file folder, main folder, custom folder (max. 1,000 folders) |
| Confidential storage | Password protection |
Network Printer
| Resolution | 600 x 600 dpi, 9,600 (equivalent) x 600 dpi | |
|---|---|---|
| Interface | USB 2.0, 10Base-T/100Base-TX/1000Base-T | |
| Supported OS*14 | Windows Server® 2003, Windows Server® 2003 R2, Windows Server® 2008, Windows Server® 2008 R2, Windows Server® 2012, Windows Server® 2012 R2, Windows Vista®, Windows® 7, Windows® 8, Windows® 8.1, Mac OS X 10.4, 10.5, 10.6, 10.7, 10.8, 10.9, 10.10 | |
| Network protocols*14 | TCP/IP (IPv4, IPv6), IPX/SPX (NetWare), EtherTalk (AppleTalk) | |
| Printing protocols*15 | LPR, Raw TCP (port 9100), POP3 (e-mail printing), HTTP, FTP for downloading print files, EtherTalk printing, IPP | |
| PDL | Standard | PCL 6 emulation |
| Option*16 | PostScript® 3™ emulation, XPS | |
| Available fonts | 80 fonts for PCL, 136 fonts for PostScript 3 emulation | |
Facsimile (optional MX-FX11 required)
| Compression method | MH/MR/MMR/JBIG |
|---|---|
| Communication protocol | Super G3/G3 |
| Transmission time | Less than 3 seconds*17 |
| Modem speed | 33,600 bps to 2,400 bps with automatic fallback |
| Transmission resolution | From Standard (203.2 x 97.8 dpi) to Ultra Fine (406.4 x 391 dpi) |
| Recording size | A3 to A5 (11" x 17" to 5 1/2" x 8 1/2") |
| Memory | 1GB |
| Greyscale levels | Equivalent to 256 levels |
- Shown with options.
- *1: Long-edge feeding.
- *2: 51 ppm for MX-M564N when equipped with MX-FN10.
- *3: A3 wide (12" x 18" paper must be fed through multi-bypass tray.
- *4: Only short-edge feeding can be used with A5 (5 1/2" x 8 1/2") paper.
- *5: Depending on usage conditions and type of paper, printing may not be executed correctly.
- *6: At rated voltage, 23°C (73.4°F). May vary depending on operating conditions and environment.
- *7: HDD capacity depends on procurement and sourcing status.
- *8: Long-edge feeding of A4 (8 1/2" x 11") sheets from paper tray, using document glass, MFP in fully ready condition. May vary depending on operating conditions and environment.
- *9: Not available when using RSPF.
- *10: Based on Sharp’s A4 standard chart, using document feeder, long-edge feeding, and one-sided scanning. Using factory default settings with Auto Colour Selection off. Scan speed will vary depending on the type of document and the scan settings.
- *11: Colour only.
- *12: Storage capacity will vary depending on the type of document and the scan settings.
- *13: Some features require option(s).
- *14: Optional MX-PK11 required for Mac OS and EtherTalk.
- *15: IPv6 is supported only by LPR printing protocol.
- *16: PostScript requires optional MX-PK11. XPS requires optional MX-PUX1 and 2GB memory.
- *17: Based on Sharp’s standard chart with approx. 700 characters (A4 or 8 1/2" x 11" long-edge feeding) at standard resolution in Super G3 mode, 33,600 bps, JBIG compression.
- Design and specifications are subject to change without prior notice.
- Mycrostoner-CAP is a trademark of Sharp Corporation. PCL is a registered trademark of Hewlett-Packard Company. PostScript 3 is either a registered trademark or trademark of Adobe Systems Incorporated in the US and/or other countries. Windows, Windows Server, and Windows Vista are registered trademarks of Microsoft Corporation in the US and/or other countries. Mac OS, EtherTalk, and AppleTalk are trademarks of Apple Inc., registered in the US and other countries. All other brand names and product names may be trademarks or registered trademarks of their respective owners.
- The ENERGY STAR logo is a certification mark and may only be used to certify products that have been determined to meet the ENERGY STAR programme requirements. ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the US Environmental Protection Agency. The ENERGY STAR guidelines apply to products only in the US, the EU, Japan, Canada, Australia, New Zealand, and Taiwan.
Product Brochure
Download
